Kit 2 Lampadas NEON c/ Controlador

Contents
- 2 thin neon tubes of 15 cm
- 2 screws of 1.27 cm
- 2 connecting wires
- 1 adapter cigarette lighter
Instructions
1) Use the screws provided, place them in the indicated location.
2) Connect the cigarette lighter adapter
Installation permanent:
1) Use the screws provided, place them in the indicated location
2) Cut the cigarette lighter adapter wire
3) Connect the red wire to the power (+)
4) Connect the black wire to ground (-)
5) If you need to connect the 12V power supply to a switch, pay attention because the ground and power wires are insulated with mesh or with electrical connectors.
Attention: It is recommended that the product be used indoors and not outdoors.