UNI-T

Testador de Voltagem Multifunções a LED - UNI-T

SKU: UT22B

Preço

€22,75

Adicionado

Descrição

Description
The UT22B-EU is a simple, easy-to-use voltage tester for measuring the presence of AC/DC voltage on 230V outlets, switches and electrical appliances. This voltage tester has IP54 protection against water and dust and is designed to withstand drops from a height of 2 meters. The good thing about this product is that it doesnt need batteries, its power is supplied by the tested voltage! The UT22B allows you to distinguish voltage from 12V to 400V (by the number of LEDs) and automatically distinguish between DC and AC voltage (""+"" or ""-"" indicators are lit or both at the same time). Accuracy of voltage level indication: the corresponding LED usually lights up fully for approx. 70% to 100% of the specified range, with the exception of the 12 V AC / DC range, where it lights up already at 50% to 100% of the voltage value. The device complies with the standards: EN61326-1: 2013, EN61326-2-2: 2013, EN61243-3: 2014.
Product parameters:
- tester voltage rating 12V to 400V AC / DC
- DC voltage polarity resolution
- water and dust resistance IP54
- damage resistance when dropped from a height of 2m
Technical parameters :
AC / DC voltage level indicators:
- in the 12 V range, the LED lights up in the 6 V to 12 V voltage range
- in the 24 V range, the LED lights up in the voltage range from 17 V to 24 V
- in the 50 V range, the LED lights up in the voltage range from 35 V to 50 V
- in the 120 V range, the LED lights up in the voltage range from 84 V to 120 V
- in the 230 V range, the LED lights up in the voltage range from 161 V to 230 V
- in the 400 V range, the LED lights up in the 280 V to 400 V voltage range
- Positive DC polarity indicators: (+) LED is on.
- DC negative polarity indicators: (-) LED is on.
- Voltage indicator o AC: both LEDs (+/-) are lit.
- tester internal impedance: 17 kO if voltage is below 50 V AC
- voltage frequency alternating measurement: 50/60 Hz
- height drop test: 2m
- water and dust protection: IP54
- dangerous voltage indicator: lights up when voltage is > 50V, flashes at 1.5 Hz frequency at voltage> 400 V
- measurement time: <5 s
- time between two measurements: > 600 s
- power source power supply: from the measured circuit
- operating temperature: -15°C to 45°C
- operating relative humidity: <85% non-condensing
- operating height: up to 2,000 meters above sea level
- storage temperature: -20°C to 60°C
- safety rating category: CAT III 400V
- product dimensions: 116 x 33 x 22 mm
- product weight: 150 g
- product color: red and gray